Sturtevant Richmont 10469, Руководство по эксплуатации

Страница: 16 / 32

Page 14
Programming the Count Direction
The unit can be programmed to count acceptable
cycles in a batch in either the upwards (from 0 to total
number in batch) or downwards (total number in batch
to 0) direction.
The Count Direction menu item is selectable for
change by pressing the Enter button when the Count Direction window is active.
When this menu item is entered a new window will be
displayed showing the currrent direction. To change
the direction press any of the arrow buttons (Up,
Down, Left, Right) and then press the Enter button to
set the change and exit.
To exit without change, press the Escape button.
Programming the Time Between Batches
A timer controls the minimum acceptable elapsed time
between batches. This specification is settable
through the Time Between Batches menu item.
To change the time, press the Enter button when the
Time Between Batches item is active. This will open
the item for review or alteration.
The current value for the specification will be dis-
played when the item is open. The Up and Down but-
tons increase or decrease the setting value by one
second. The Left and Right buttons increase and
decrease the setting by 100 seconds with each press
of the button. When the desired value is displayed,
press the Enter button to set the value and return to
the programming menu. To exit this item without changing the value, press the Escape button.
Programming the Time Between Cycles
A timer controls the minimum acceptable elapsed time
between switch wrench cycles (individual fasteners).
This specification is settable through the Time
Between Cycles menu item.
To change the time, press the Enter button when the
Time Between Cycles item is active. This will open the item for review or alteration.