Sturtevant Richmont 10469, Руководство по эксплуатации

Страница: 24 / 32

Page 22
use the Up and Down buttons to increase or decrease
this value.
To save the new contrast value setting and return to
the main menu, press the Enter button. To exit this
function without change, press the Escape button.
Programming a Password Change
All TCV-Ethernet units ship with a default password of
“0104”. This password may be changed through this
menu item. To access this item, press the Enter button
when the item is active.
The password will be displayed with the first digit visi-
ble and the other three digits represented by asterisks.
The Left and Right buttons allow the user to move
among the digits for editing. The Up and Down buttons
increment and decrement the active digit. only the
active digit will be displayed at any time in the process.
The other digits will be shown as asterisks.
After a change is made, press the Enter button to save
the change and return to the main menu. The Escape button may be pressed at any time to
return tot he menu without activating any change.
Programming Control Cell ID (Identification)
The Control Cell ID is an alphameric identifier for the
location (manufacturing cell) where the unit is used.
This cell identifier is added to every torque record
obtained from the unit.
To edit the Control Cell ID, press the Enter button
when the item is active.
The display will show an alphameric field for entry. The
Left and Right buttons move among the characters to
provide access for editing. The Up and Down buttons
allow editing of the currently active character.
To save an edited identifier and return to the main
menu, press the Enter button. To exit this item without saving any changes, press the Escape
button.