Sturtevant Richmont 10469, Руководство по эксплуатации

Страница: 19 / 32

Page 17
Programming - Erasing a Wrench
The current wrench (transceiver) can be removed
from memory through this function. To access this
function, press the Enter button when the TCV Erase
item is displayed.
The display will change, providing a choice of erasing
the identification number from memory or leaving the
current wrench transceiver active. To erase the
wrench transceiver from memory and return to the
main item sequence, press the Enter button. To exit
this function without erasing the wrench from memory,
press the Escape button.
Programming - Viewing A Wrench (Transceiver) Identification Number
Each wrench transceiver has a unique four-digit identi-
fication number. This allows the unit to work with a
specific tool when multiple tools are used in close
proximity and on the same channel.
The transceiver identification number can be viewed
through this function in the programming menu. Press
the Enter button when this menu item is active to view
the number.
The current identification number will be displayed.
Press any front panel programming button to return to
the main programming menu.
Programming - Relay Settings
The three relay contacts available on the side of the
unit can be programmed to close momentarily or to
remain closed (maintained) until another relay even
occurs. When set to momentary the contacts are
closed for 200ms.
To check or change the relay contact setting, press the
Enter button when this item is active. The display will
then show the current setting. To keep the current set-
ting, press the Escape button. To change the setting,
press any arrow button once, then press the Enter but-
ton to save the change and return to the main menu.