Sturtevant Richmont 10469, Руководство по эксплуатации, Страница: 13 / 32

Page 11
A password is required to enter the programming func-
tions fo the unit. The “Enter Password” window will be
displayed once the Enter button has been pressed.
The default password is “0104”.
The key conventions when entering the password are:
•
The left and right arrow buttons move the cursor and currently active digit selection among
the positions.
• The up and down arrow buttons raise and lower the value of the digit that the cursor is
highlighting.
• The Escape button will stop the process of accessing the programming menu and return to
the operating screens.
• The Enter button causes the unit to compare the current password selection to the pass-
word in memory. If the correct password has been selected, access to the programming
menu is granted.
Once the password is accepted, the first item on the program menu is displayed. There are 13
program items for the TCV functions and 15 program items for the Ethernet and miscellaneous
functions. Each item has an entry screen and at least one screen for programming the item.
The program menu navigation conventions are:
• The Up and Down buttons scroll through the menu items in sequence.
• The Enter button opens the current item and presents the screens for editing.
• The Escape button exits an item without changing or saving the value.
• After the item is edited, the Enter button saves and exits. There is often a window that dis-
plays while the new value is being saved. A second press of Enter is used to finish.
The front panel programmable items for TCV functions are:
TCV Batch Count TCV/RST Total/Batch
TCV Timer Min TCV Channel
TCV Timer Max TCV Add Wrench
Count Direction TCV Erase Wrench
Time Between Batches TCV View Wrench ID
Time Between Cycles Relay Settings
TCV Beep Setting
The front panel programming items for Ethernet and miscellaneous functions are:
Local IP Address LCD Contrast
Gateway Address Change Password