Studer OnAir 500 Modulo, Руководство по эксплуатации

Страница: 92 / 118

OnAir 500 Digital Mixing Console
Timers 9-1
Date printed:
30.07.04
9 TIMER OPERATION
The OnAir 500 contains two timers. These can be controlled either directly
from the buttons on the meter bridge, or automatically from the channel fad-
ers.
9.1 Manual Operation
The TIMER 2 button indicates which timer the START , STOP , and RESET but-
tons will operate.
If the
TIMER 2
button is illuminated , then the
START
,
STOP
, and
RESET
but-
tons control TIMER 2 (the red display on the right). If the TIMER 2 button is
not illuminated , the START , STOP , and RESET buttons control TIMER 1 (the
green, left-hand display).
If the timer is running, the
START button will be illuminated; otherwise the
STOP
button will be illuminated.
Button Actions: • Pressing the STOP button will stop the active timer.
• Pressing the
START
button will start the currently active button.
• Pressing the RESET button will reset the currently active timer, but will
not alter its stopped/running state.
• Pressing the TIMER 2 button will change the currently active timer from 1
to 2 or vice versa.
9.2 Automatic Operation
The timers can be controlled automatically by the channel faders (there is a
menu for configuring and enabling the triggering actions).
1 Press the timer
SETUP
button located just below the timer displays. The LC
display will read:
Channel 1 Tmr1
Not Triggered
2
Press the SELECT button on the channel you want to configure.