Studer OnAir 500 Modulo, Руководство по эксплуатации

Страница: 59 / 118

OnAir 500 Digital Mixing Console
4-16 Menu Pages
Date printed: 10.08.05
1 Press the SETUP button found below the LC display. This will enter the setup
mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the
Line/CF Outputs
menu page. The SETUP button will flash upon selec-
tion.
3 Press the SETUP button to enter the line/CF outputs set-up mode. The LC
display will show:
Line Output: 1 - >
Outs 1+2 Mono
4 Use the PARAMETER encoder to select which of the four line/cleanfeed outputs
you want to use.
5 Press the i (down) arrow button and use the PARAMETER encoder to choose
whether Line Outputs 1-2 and 3-4 are configured to operate as individual
mono outputs or as stereo pairs.
6 Press the u (right) arrow button to enter the channel selection page. The LC
display will show:
< - Mode:Prog Mix-
Channel 1
7 Press the i (down) arrow button and then use the PARAMETER encoder to
select which channel you want to set up as a cleanfeed channel.
8 Now press the z (up) arrow button and use the PARAMETER encoder to
select
Prog Mix-
or
Aud Mix-
, i.e., whether the cleanfeed output will
be sourced from the PROG or AUD bus.
9
Pressing the
SETUP
button will exit this menu. However, the
SETUP
button will
still flash, the next menu can be selected for adjustment. To exit completely,
press one of the
DYN , EDIT , or PRESETS buttons twice.
Continuous Talkback Mode:
In this mode the selected talkback channel can also talk directly to any one
of the line/cleanfeed outputs.
Any output that is set-up as a continuous talkback output will receive the
talkback bus signal as soon as the fader on the talkback channel is closed.
1
Press the SETUP button found below the LC display. This will enter the setup
mode.
2
Use the PARAMETER encoder to scroll through the menu pages to locate the
Line/CF Outputs
menu page. The SETUP button will flash upon selec-
tion.