Studer OnAir 500 Modulo, Руководство по эксплуатации

Страница: 91 / 118

OnAir 500 Digital Mixing Console
8-4 Presets
Date printed:
30.07.04
8.4 Deleting a Snapshot Preset
1 Press the
PRESETS
button to enter the presets menu. The LC display will
read:
1:Preset 001
Recall Preset
2
Use the PARAMETER encoder to select the snapshot preset that you want to
delete.
3
Press the
i
(down) arrow button.The Recall Preset field of the LC dis-
play begins to flash along with the PRESETS button.
4 Use the
PARAMETER
encoder to select Delete Preset , and then press
the PRESETS button to delete the selected preset. The LC display will show:
Deleted
Preset!
5 Press the
z
(up) arrow button to enter the upper field of the LC display.
6
Press the PRESETS button to exit the menu.
Warning:
There is no undo facility when deleting presets!
8.5 Recalling the Factory Default Preset
Recalling the factory default preset will reset the control surface to its de-
fault settings. This is useful as a starting point when you are setting up a new
layout for the control surface.
1
Press the PRESETS button to enter the presets menu.
2 Turn the
PARAMETER
encoder anti-clockwise (i.e. to the left) to select Fac-
tory Default Recall Preset .
3 Press the
i
(down) arrow button to highlight the Recall Preset field of
the LC display.
4
Press the PRESETS button to recall the factory default preset.