Studer OnAir 500 Modulo, Руководство по эксплуатации

Страница: 51 / 118

OnAir 500 Digital Mixing Console
4-8 Menu Pages
Date printed: 10.08.05
4.5 Clock Source
The OnAir 500 can operate at either 44.1 or 48 kHz when set to its own
internal wordclock, but can also be configured to lock to incoming wordclock
appearing at either the AES/EBU or S/PDIF digital inputs.
Note:
The four AES/EBU digital inputs and the S/PDIF digital input incorporate
sample rate converters (SRC) which allows external digital signals to be con-
nected without the need for the console to be synchronized to the incoming
wordclock contained in the digital source signal.
Configuring the Clock Source: 1 Press the SETUP button found below the LC display. This will enter the setup
mode.
2 Use the PARAMETER encoder to scroll through the menu pages to locate the
Clock Source
menu page. The
SETUP
button will flash upon selection.
3
Press the SETUP button to enter the clock source setup mode.
s n o it p O e l b a li a v A
z H k 0 .8 4 la n r et nI
z H k 1 .4 4 la n r et nI
C N B la n r et x E
1 1 S E A la n r et x E
The LC display will show the current selection:
Wordclock Source
Internal 48.0kHz
4 Use the PARAMETER encoder to select which wordclock source you want to
use. The SETUP button will flash.
5 Press the SETUP button to store the new clock settings.
6 Pressing the SETUP button will exit this menu. However, the SETUP button will
still flash, the next menu can be selected for adjustment. To exit completely,
press one of the
DYN
,
EDIT
, or
PRESETS
buttons twice.
Note:
If wordclock is lost whilst connected to an external wordclock source, the
following display appears:
WORDCLOCK LOST!
SET TO INT 48K