Studer OnAir 500 Modulo, Руководство по эксплуатации

Страница: 114 / 118

OnAir 500 Digital Mixing Console
Connectors 12-11
Date printed: 10.08.05
12.3.9 Return to the Normal Configuration
Now that you have confidence that the signals do appear on the main pro-
gram outputs, this would be a good moment to unplug the amplifier driving
your speakers from the
STE 1/PROG OUT L/R outputs, and to connect it to the
control room monitor (
MONITOR CTRL RM
) output using a stereo ¼” Jack
plug.
Although many studios have their own designations, for our monitoring pur -
poses the room in which the OnAir 500 is located would be called the
control
room
, and a separate area (e.g. an interview booth or a talk studio) would be
called the
studio
.
You will find that with the speakers connected to this output, you can no
longer hear the microphone connected to channel 1.
You can select a variety of monitoring sources for your control room and
studio speakers. In this instance, you should select the
PROG
button on the
CONTROL ROOM MONITOR
panel.
The control room speakers can be completely silenced by pressing the MUTE
button; if the button is not active, their volume can be adjusted using the
control next to the
MUTE
button. Note that these controls affect only what is
heard through the monitor speakers and headphones,
but not
what is sent to
air over the main
STE 1/PROG OUT L/R
programme outputs.