Studer OnAir 500 Modulo, Руководство по эксплуатации

Страница: 102 / 118

OnAir 500 Digital Mixing Console
SW Update 11-5
Date printed:
30.07.04
11.2 Re-Initializing the OnAir 500
There are four different re-initializing processes that can be performed on
the OnAir 500.
11.2.1 Total Reset of the OnAir 500
Totally resetting the OnAir 500 will take it back to the status it was in when
it left the factory
and will delete all information stored in the console . This
mode is useful if you have purchased the console second-hand and would
like to reset it to its default state. To perform a total reset do the following:
1 Make sure the console is turned off.
2 Whilst holding down the
t u z i
arrow buttons, switch the console on
again.
3 Continue to hold the arrow buttons until the LC display shows the following
message:
Total Reset To Total Reset Tot Total Reset Tota
Studer OnAir 500
11.2.2 Effects/Dynamics Presets Reset
Performing this reset will delete only the effects (FX) and dynamics presets
stored in the user memory locations.
1 Make sure the console is turned off.
2 Whilst holding down the
t u
(left/right) arrow buttons, switch the console
on again.
3 Continue to hold the arrow buttons until the LC display shows the following
message:
FX/Dyn Presets Res FX/Dyn Presets Rese
Studer OnAir 500
FX/Dyn Presets Reset