LUCAS
®
3 Chest Compression System –
Service Manual
3328798-002, ©2017 Physio-Control, Inc.
Page
84
of
91
Replacing the Power Inlet
1.
Disassembling
•
Follow the instructions in Section Replace the Compression Module.
•
Follow the instructions in Section Replace the Controller PCB
•
Follow the instructions in Section Replace the Protective PCB
Warning
: Always use ESD protection when handling PCB’s!
•
Remove the four Torx 20 screws to remove the Main Body Lid.
•
Use the extraction tool to remove the wires from the Power Inlet.
•
With the wires removed you can now remove the nut and Power Inlet.
