LUCAS
®
3 Chest Compression System –
Service Manual
3328798-002, ©2017 Physio-Control, Inc.
Page
82
of
91
•
Cut off the excess cable tie tails
•
Connect antenna to the Communication Board and tuck away the antenna cable beneath antenna and
between belt cover and Control PCBA.
•
Put back the Hood according to
Reassembling
3. Test
•
Perform a Function Check according to
How to Replace the Communication PCB
1. Disassembling
•
Before disassembling and changing any PCB and if possible; connect a laptop and perform “Store View”
using
•
Follow
Disassembling
instructions in
How to Replace the Controller PCB
to take out the Controller PCB.
•
Use a plier carefully cut off 3 plastic screws that hold the communication PCB on Controller PCB
•
Save the plastic spacers and the nuts for reuse
Antenna Cable
Connector
