Stryker LUCAS 3, Руководство по обслуживанию

Страница: 69 / 91

LUCAS
®
3 Chest Compression System – Service Manual
3328798-002, ©2017 Physio-Control, Inc. Page 69 of 91
•
Put back the Drive Belt according to Reassembling instruction in How to Replace the Drive Belt .
•
Put back the Compression Module according to Reassembling instruction in How to Replace the
Compression Module .
•
Put back the Hood according to Reassembling instruction in How to Replace the Hood .
•
Put back the Bellows according to Reassembling instruction in How to Replace the Bellows .
•
Put back the Suction Cup.
3. Test
Perform a Function Check according to Function Check .
How to Replace the Control PCBA
1. Disassembling
•
Before disassembling and changing any PCB and if possible; connect a laptop and perform “Store View”
using
LUCAS® 3 Program Loader .
•
Follow Disassembling instructions in How to Replace the Compression Module to take out the
Compression Module.
•
Remove the two remaining screws from beneath and lift out the PCB carefully.
•
Warning : Always use ESD protection when handling PCBs!
•
Remove SD-card from old Controller PCB. Check that the SD-card is intact and readable/writeable. If SD-
card is working properly keep it for the new Controller PCB.
•
Remove Communication PCB according to the Disassembling Instruction in How to Replace the
Communication PCB
Terminal
Motor Cable Outlet