Storti husky DSS 90, Эксплуатация и обслуживание, Страница: 81 / 109

27
EN
OPERATION AND MAINTENANCE
fig.3
open position
closed position
tap on scraper cylinders,
miller arm
A
fig.2
If unusual conditions are identified, check for the possible solutions
in the instruction manual. If this is not possible, contact our After-
Sale Service Centre.
Sect. 5 MACHINE OPERATION
Sect. 5.1 FINAL CONTROL PRIOR TO OPERATION
Before operating the machine, check the following functions.
1) Check that the emergency button in not engaged ( refer to the
relevant supplied manual ) ( HUSKY DS only )
(option HUSKY MT) .
2) Check that all the taps of the hydraulic cylinder are set to “open”
position (A fig.3) - (B fig.3 closed)
3) Test the manual (MT) or electric controls (DS): opening of miller
rotation door, scraper up/down movements, auger rotation foot up
movement, etc.
4) Before moving the machine, remove the support foot (fig. 2).
5) After testing all the controls, switch the machine off and check
for oil leaks.
Sect. 5.2 ILLUSTRATION OF STANDARD MANUAL
CONTROLS - 2 / 3 SERVICE (MT version)
NOTE: the CONTROL layout below is not binding.
In fact, the layout can vary according to the type of
configuration requested.
fig.1
A
1
1
2
5
7
part 1 / 2 possible options on the same lever
according to machine configuration
part 2 / 5 / 7 possible options on the same
lever according to machine configuration
2
1
B