StorageTek Host Software Component 6.0, Руководство системного программиста

Страница: 413 / 718

Chapter 5. Problem Determination, Diagnostics, and Recovery 383
1st ed., 6/30/04 - 312579601
Examples:
Issuing the command:
=WHERE SLSBINIT 23FDF0
Results in the messages:
SLKOWH671I Module SLSBINIT at address 23FD50 compiled 09/20/88 14.20
SLKOWH674I Address 23FDF0 = EP : SL0000A0
SLKOWH674I Address 23FDF0 = CSECT: SL0000A0
HSC Diagnostic Commands
The following HSC diagnostic commands are provided:
• LIst command
• Display command.
The HSC LIst command is provided for diagnostic support for the HSC. Use this
command under the direction of StorageTek support personnel.
LIst Command
The LIst command is used to display an HSC data structure.
Syntax
Parameters
LIst
initiates the LIst command.
data-structure
specifies the name of a single HSC data structure. It may be any one of the following:
LVT Library Vector Table
BCVT Initialization/Termination Communications Vector Table
CCV CAP Communication Vector Table
DCV Database Server Communications Vector Table
FCVT Configuration Control Communication Vector Table
HCVT Host Communication Vector Table
JCVT Job Processing Communication Vector Table
LCVT LMU Communication Vector Table
MCVT Mount/Dismount Vector Table
OCVT Operator Command Vector Table
QVT Ascomm Vector Table
RCVT Recovery Communication Vector Table
UCT Utilities Communication Vector Table
|VCT Volume Cell Communication Table