StorageTek Host Software Component 6.0, Руководство системного программиста

Страница: 364 / 718

334 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
JCL/Parameter File Syntax
Syntax for JCL (SCP) and parameter file (CMS) definitions differs as follows:
SLSCNTL
For SCP:
/FILE SLSCNTL DEV vaddr DSN control.set.name
For CMS:
SLSCNTL vaddr DSN control.set.name
where:
vaddr
virtual address of the disk containing the CDS. For SCP, this is the address of the
disk defined for the ACS service machine. For CMS, this is the address of the disk
linked to the machine executing the SLUVOLR EXEC.
control.set.name
name of the control data set.
SLSPRINT
For SCP:
/FILE SLSPRINT DEV PRNT CLASS C
For CMS:
SLSPRINT PRINTER | DISK fn ft fm
Table 18. SLSVA Effect on Volume Report
HSC State: SLSVA Specified: SLSVA Not Specified:
Active Use VOLATTRs pointed to
by SLSVA.
*
* If VOLATTRs have been defined, media prefix characters are displayed before the ‘‘Media’’ field
if the media types reported by the LMU and the VOLATTR statements do not agree. If VOLATTRs
are not present, media prefix characters are not displayed.
Use VOLATTRs used by the
HSC.
*
Inactive Use VOLATTRs pointed to
by SLSVA.
*
The HSC generates an error
message saying that SLSVA
is missing and incorrect data
may be reported. In addition,
no prefix characters appear
before the ‘‘Media’’ field on
the report to identify media
type discrepancies.
Volume Report