StorageTek Host Software Component 6.0, Руководство системного программиста

Страница: 154 / 718

124 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
PROGram or PGMname
optionally, specifies the program name. If PROGram is not specified, the default
value is *. The program name used is the job step program name.
program-name
specifies the program name.The TAPEREQ statement is used only when the
specified program-name matches the program name in the request.
DATASET or DSN
optionally, specifies the data set name. If DATASET (or DSN) is not specified, the
default value is **. The rules of SMS and RACF generics are followed for this
parameter.
Note: The name you specify for this parameter may be different from the value
coded in the DSN parameter on a DD statement. For example,
DSN=&&ABC
may be coded on a DD statement if a data set is temporary. However, the actual
data set name is not &&ABC. Similarly, if the DSN parameter refers back to a
previous DD statement, the data set name is resolved to the referred to data set.
Thus, the data set referred to must be coded on the DATASET parameter in
order for the TAPEREQ control statement to be processed.
dataset.name
specifies the data set name. The TAPEREQ statement is used only when the
specified
dataset.name matches the data set name in the request.
DDName
optionally, specifies the DDname. If DDName is not specified, the default value is *.
DD-name
specifies the DDname. The TAPEREQ statement is used only when the
specified
DD-name matches the DDname in the request.
RETPD
optionally, specifies the retention period and the relationship that must exist. If you
do not specify either RETPD or EXPDT, the default value is RETPD(GE,0) (any
expiration date will match this criterion).
EQ equal to
NE not equal to
GT greater than
GE greater than or equal to
LT less than
LE less than or equal to.
TAPEREQ