StorageTek Host Software Component 6.0, Руководство системного программиста

Страница: 164 / 718

134 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
Syntax
Control Statement Name
TREQDEF
initiates the TREQDEF command and control statement
Parameters
DATASET or DSN
specifies the name of the data set containing the TAPEREQ statements to be
processed and, optionally, an OPTion TITLE statement. (Refer to “Tape Request
(TAPEREQ) Control Statement” on page 118 and “OPTion TITLE Control
Statement” on page 113 for details on syntax and parameters).
Note: The definition data set may contain TAPEREQ, UNITATTR, VOLATTR, and
OPTion TITLE statements. Only OPTion TITLE and TAPEREQ statements are
processed. If any other statement is encountered, an error message is issued and the
statement is ignored.
dataset.name
specifies the name of the data set containing tape request parameters. If the data
set name includes a member name, dataset.name must be enclosed in quotes.
For example,
DATASET(‘YOUR.DSN(MEMBER)’)
VOLume
specifies the serial number of the DASD volume on which the data set resides. This
parameter is optional. Specify the VOLume parameter if the data set is not cataloged,
or if a data set on a volume other than the volume indicated by the catalog is to be
used.
Note: The volume specified must be a DASD volume.
volser
specifies the volume serial number for the definition data set.
TREQDEF DATASET( dataset.name )
DSN( dataset.name ) VOLume( volser ) UNIT( unitname )
HOSTID(
host-id
,
)
TREQDEF