StorageTek Host Software Component 6.0 Скачать руководство пользователя

Страница: 213 / 718

Chapter 4. Utility Functions 183

1st ed., 6/30/04 - 312579601

Reports Created by Utilities

Several utilities produce reports when executed. The reports are in addition to the utility
function. Utilities that produce reports include:

• Activities Report
• AUDit
• BACKup
• MOVe
• Volume Report.

A description of each utility and resulting report is contained in this chapter.

Report Headings

Utilities provide reports at the end of execution. Report headings include the following
information:

• date/time of the report,
• page number(s),
• host software version number, and
• name of the utility function executed.

Parameters Controlling Report Headings

There are two optional parameters that change the format of output reports.

Parameter

Description

NOHDR

Suppresses printing of report headings (error messages still

can be written to the report file). This can be useful when

running the Volume Report utility with the VOLDATA

parameter specified, which produces a raw volume (flat)

data file.
This parameter can be used only with the Activities Report,

MOVe, and Volume Report utilities.
NOHDR and LINECNT are mutually exclusive.
If NOHDR is not specified, the default is to print headings

containing the following information:

• date/time of the report
• page number(s)
• host software version number
• name of the utility function executed.

MIXED

Prints all report headings and messages in mixed case. The

default is uppercase.

LINECNT=

Specifies the number of lines per page for the SLUADMIN

report. Allowable values are 10 through 99; the default is

60 lines per page. LINECNT and NOHDR are mutually

exclusive.

Содержание Host Software Component 6.0















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Host Software Component 6.0

Отзывы:

Похожие инструкции для Host Software Component 6.0

Бренды по названию

Популярные бренды

StorageTek Host Software Component 6.0, Руководство системного программиста

Результаты поиска

Содержание Host Software Component 6.0

Отзывы:

Похожие инструкции для Host Software Component 6.0

Бренды по названию

Популярные бренды