UM0891
Running the demonstration
Doc ID 16982 Rev 1
2.7 Demonstration
applications
The following section provides a detailed description of each part of the demonstration.
In the demonstration, the core runs at HCLK = 24 MHz. Four LEDs: LD1, LD2, LD3 and LD4
flash throughout the demonstration at a frequency depending on the core clock.
2.7.1 Product
presentation
This part of the demonstration presents all the STM32F100VB embedded peripherals and
features. The product presentation is made with a slide show. Each slide is associated with
a dedicated speech. When you start the product presentation, the first slide appears and the
corresponding speech starts. Once the speech is finished, the second slide is displayed
accompanied by its speech and so on until the last slide.
When the
Product presentation
menu is selected, the message shown in
is
displayed on the LCD screen.
Figure 17.
Product presentation is ready to start
Product presentation slides
The presentation is composed of 14 slides where all features and advantages of the
STM32F100VB are listed.
and
show the first and last slides,
respectively.
Figure 18.
First presentation slide
Press SEL to start
When presentation
starts use RIGHT and
LEFT to go to the
next/previous slide
and SEL to exit
