STMicroelectronics STM32100B-EVAL, Руководство пользователя

Страница: 12 / 48

Running the demonstration UM0891
12/48 Doc ID 16982 Rev 1
2.2 Demonstration startup
The demonstration starts after a board reset. The system checks if an SD memory card is
already plugged into the connector CN11. If no card detected, the demonstration does not
start and the message shown in
Figure 3 is displayed on the LCD screen.
Figure 3. SD card check
To continue the demonstration, insert an SD card. The demonstration graphic icons and
bitmap files are now checked in the MicroSD card (see
Section 2.6.5: External memory
organisation ). All the icons have to be correctly programmed in the MicroSD card for the
demonstration to start. If an icon is missing, the demonstration does not start and the
message shown in
Figure 4 is displayed on the LCD screen.
Figure 4. Warning message
If the icons are correctly loaded into the SD card memory, the welcome screen is displayed
and the ST logo appears on the LCD screen:
Figure 5. ST logo
Please insert SD Card
Warning
No loaded Bitmap
files. Demo can’t be
executed.
Please be sure that
all files are
correctly programmed
in the MicroSD card
and restart the demo