STM32100B-EVAL demonstration programming
UM0891
Doc ID 16982 Rev 1
4 STM32100B-EVAL
demonstration
programming
4.1
Programming the media files
The STM32100B-EVAL board comes with an MircoSD card memory preprogrammed with
audio and image resources used by the demonstration. However you can load your own
image (*.bmp) and audio (*.wav) files in the “USER” directory, providing that these file
formats are supported by the demonstration. For more details please refer to
Section 2.7.3: Images Viewer submenu
section.
Figure 70.
SD card directory organization
The default content of the media files (STFILES and USER directories) can be retrieved
under the Binary\Media folder. So if you want to reprogram the MicroSD card, you can copy
the content of the Binary\Media to your own SD memory.
4.2
Programming the demonstration
You can program the demonstration using 2 methods:
Using the Bootloader
To program the demonstration binary images into the internal Flash memory, you have to
use the stm32100b_eval_fw_v1.0.0.bin file with embedded Bootloader. For more details,
please refer to the Bootloader application note AN2606.
Using preconfigured projects
1.
Select the folder corresponding to your preferred toolchain (RVMDK, EWARMv5 or
HiTOP)
2.
Open the STM32100B_EVAL project and rebuild all sources
3.
Load the project image through your debugger
4.
Restart the evaluation board (Press B1: reset button)
