STMicroelectronics STM32100B-EVAL, Руководство пользователя

Страница: 13 / 48

UM0891 Running the demonstration
Doc ID 16982 Rev 1 13/48
After some seconds, the following STM32 slide is displayed on the LCD screen:
Figure 6. STM32 family
2.3 Time and date configuration
When the board is powered up for the first time and no power supply is detected on V
BAT
(battery), you are prompted to set the time, year, month and day. The following message
appears on the LCD screen.
Figure 7. Time and date configuration
To set the time and date, press the SEL push-button. The Time Adjust and Date Adjust
menus are displayed. Use the joystick UP/DOWN and SEL push-buttons to set the
time/date.
To ignore the configuration sequence, press any key except for the SEL push-button.The
main menu is displayed.
Note: 1 You can set the time parameters at any time by using the Calendar menu (see
Section 2.7.2: Calendar ).
2 If the time has already been configured, then the number of elapsed days (higher than 1
day) from the last time the demonstration board was powered up appears on the LCD
screen. It is soon followed by the current date.
2.4 Menu navigation
Once the time/date have been set, the main menu appears. The main menu is displayed in
the form of a set of icons. It presents all the submenus in the same screen. You can navigate
through the submenus by pressing the joystick UP, DOWN, RIGHT and LEFT. To enter the
desired submenu, press the SEL joystick push-button, and the submenu corresponding to
the selected icon is displayed.