Still Tugger train Autarkic E Frame Скачать руководство пользователя

Страница: 22 / 144

Safety

Deﬁnition of terms used for responsible persons

Personnel

All operators must:
– Have read and understood these operating

instructions.

– Have completed the appropriate operator

training

– Observe the basic regulations governing

safety at work and accident prevention.

DANGER

Taking drugs, alcohol or medications that affect the

responses of an individual limits the ability of that

individual to drive a tugger train!
Individuals under the inﬂuence of the aforementio-

ned substances are not permitted to perform any

work on or with a tugger train.

Operating company

The operating company is the natural or legal

person or group who uses the chassis or on

whose authority the chassis are used.
The operating company must ensure that

the chassis are used only for their intended

purpose, and that they are used in compliance

with the safety regulations set out in these

operating instructions.
The operating company must ensure that all

operators of the chassis read and understand

the safety information.
The operating company is responsible for the

scheduling and correct performance of regular

safety checks.
We recommend that the national performance

speciﬁcations are adhered to.
The operating company must make personal

protective equipment (protective clothing,

safety footwear, safety helmet, industrial

goggles, gloves) available to the operators of

the chassis in accordance with the application

conditions.

50988012117 [EN]

Содержание Tugger train Autarkic E Frame

















































































































































Результаты поиска

Содержание Tugger train Autarkic E Frame

Отзывы:

Похожие инструкции для Tugger train Autarkic E Frame

Бренды по названию

Популярные бренды

Still Tugger train Autarkic E Frame, Оригинальное руководство пользователя

Результаты поиска

Содержание Tugger train Autarkic E Frame

Отзывы:

Похожие инструкции для Tugger train Autarkic E Frame

Бренды по названию

Популярные бренды