Still Tugger train Autarkic E Frame, Оригинальное руководство пользователя

Страница: 19 / 144

Introduction
2
Residual risk
must determine and assess hazards during
operation, and establish the occupational
health and safety measures required for
employees. The operating company must
therefore draw up appropriate operating
procedures (§ 6 ArbSchG) and make them
available to the driver. These operating
instructions for the frames do not form the
operating procedures. A responsible person
must be appointed.
The structure and equipment of the frames
correspond to the Machinery Directive
2006/42/EC and are therefore identified with
the CE mark. The operating company must,
however, select the frame type and frame
equipment so as to comply with the local pro-
visions for deployment.
The result must be documented (§ 6 Arb-
SchG). When deployment of the frames in-
volves similar hazard situations, the results
may be summarised. This summary is de-
signed to help to meet the requirements of
this regulation. The summary specifies the
primary hazards that, in the event of non-com-
pliance, are the most frequent causes of acci-
dents. If other major hazards are present as
a result of the specific operating conditions,
these hazards must also be taken into consid-
eration.
The conditions of use for the frames are
broadly similar in many plants, so the haz-
ards can be summarised in one overview. The
information provided on this subject by the
relevant employers’ liability insurance associ-
ation or national authorities must be observed.
50988012117 [EN] 13