Still RX70-40 Скачать руководство пользователя страница 81

Страница: 81 / 392

Operation

Checks and tasks before daily use

Component

Course of action

Underside

Check the area under the forklift truck for leaking

consumables.

Overhead guard, guard grille (variant)

Perform a visual inspection for integrity.

Check for secure mounting.

Steps

Make sure they are clean (free of ice, not slippery).

Panes of glass (variant)

Perform a visual inspection for integrity.

Make sure they are clean (also free of ice).

Handholds

Check for secure mounting.

Maintenance lids

Check the close function and close the lids.

Fuel system, fuel tank

Perform a visual inspection for damage and leak-

ages.

Have damaged components replaced only by the

authorised service centre.

Battery

Perform a visual inspection for integrity and defor-

mation.

Bonnet and side ﬂap

Perform a visual inspection for integrity and defor-

mation.

Check that the interlock is in good condition and is

working correctly.

Check the close function and close the cover.

Coupling pin, tow coupling (variant)

Perform a visual inspection for deformation and

wear (for example, bent, torn, broken).

Check the securing bush in the counterweight for

integrity and that it is working correctly.

Check that the linchpin is present and working

correctly (chain, rope, split pin).

Labelling, adhesive label

Check for presence, integrity and legibility.

Replace damaged or missing adhesive labels in

accordance with the section entitled "Labelling

points".

Driver's seat, seat belt

Check the integrity and function.

Lighting, warning units

Check the integrity and function.

Antistatic belt

Perform a visual inspection for integrity.

Ensure cleanliness.

The antistatic belt must be long enough to touch the

ground adequately.

Lift and tilt cylinders, tank, valve block,

hoses, pipes, connections

Perform a visual inspection for damage and leak-

ages.

Check the area under the truck for leaking consum-

ables.

Have damaged components replaced only by the

authorised service centre.

57348011850 EN - 02/2019 - 11

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды