Still RX70-40 Скачать руководство пользователя страница 39

Страница: 39 / 392

Safety

Basic principles for safe operation

Decal information with the following data must

be permanently afﬁxed to the truck so that it is

clearly visible:
• Type of modiﬁcation
• Date of modiﬁcation
• Name and address of the company that

carried out the modiﬁcation

Changes to the overhead guard and

roof loads

DANGER

In the event of the overhead guard failing due to

a falling load or the truck tipping over, there are

potentially fatal consequences for the driver. There

is a risk to life!
Welding and drilling on the overhead guard chan-

ges the material characteristics and the structural

design of the overhead guard. Excessive forces

caused by falling loads or the truck tipping over may

result in buckling of the modiﬁed overhead guard

and no protection for the driver.
– Do not perform welding on the overhead guard.
– Do not perform drilling on the overhead guard.

CAUTION

Heavy roof loads damage the overhead guard!
To ensure the stability of the overhead guard at

all times, a roof load may only be mounted on the

overhead guard if the structural design has been

tested and the manufacturer has given approval.
– Seek advice from the authorised service centre

for the mounting of roof loads.

Warning regarding non-original parts

Original parts, attachments and accessories

are specially designed for this truck. We

speciﬁcally draw your attention to the fact that

parts, attachments and accessories supplied

by other companies have not been tested and

approved by STILL.

57348011850 EN - 02/2019 - 11

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды