Still RX70-40 Скачать руководство пользователя страница 210

Страница: 210 / 392

Operation

Attachments

7312_003-113_V2

Controlling attachments using

the double mini-lever and the 5th

function

NOTE

For technical reasons, clamping attachments

must not be controlled via the 5th function.

NOTE

The "lift mast" 360° lever (3) and the "attach-

ments" cross lever (2) control four hydraulic

functions. The designation "5th function" re-

fers to the fact that the 5th hydraulic function

can be controlled with the cross lever by swit-

ching the functions using the "5th function"

function key (1).

The pictograms on the "attachments" cross

lever (2) show the respective functions that

are activated by this lever.
This essentially involves the following:
– Actuate the "5th function" function key (1)

and move the "attachments" cross lever (2)

in the direction of arrow (E).

The attachment moves in accordance with the

pictogram in position (E).
– Actuate the "5th function" function key (1)

and move the "attachments" cross lever (2)

in the direction of arrow (F).

The attachment moves in accordance with the

pictogram in position (F).

NOTE

The pictograms are attached depending

on the pre-assembled attachment. If an

attachment with other functions is ﬁtted, the

pictograms must be checked for the correct

representation and changed if necessary.

– Contact the authorised service centre if

required.

198

57348011850 EN - 02/2019 - 11

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды