Still RX70-40, Оригинальное руководство пользователя

Страница: 160 / 392

4
Operation
Lifting
Overriding and reactivating the auto-
matic lift cut out
If a load needs to be lifted to the truck's
maximum lift height and the automatic lift
cut out function is not required, it is possible
to override the lift cut out. It is automatically
reactivated when the truck is switched off and
back on again.
To override the automatic lift cut out:
F1
1
7312_003-160_V3
– Press Softkey (1).
Automatic lift cut out is switched off.
The symbol is displayed. Loads can be
lifted to the maximum lift height for the truck.
To switch the automatic lift cut out back on:
– Press Softkey
(1).
Automatic lift cut out is switched on.
The symbol is displayed. Loads can be
lifted only to the set lift height for the truck.
Lift mast vertical position (variant)
Description
If the truck is equipped with the "automatic
mast vertical positioning" comfort feature
(variant), the driver can lower goods, such
as paper rolls, vertically with precision and
therefore avoid damage when unloading.
The tilt cylinders run into the end stops gently
to prevent hard vibrations and impacts.
Oscillating motions of the truck are minimised,
thus increasing work safety. The automatic
mast vertical positioning reduces wear on
various components and therefore reduces
repair costs.
148 57348011850 EN - 02/2019 - 11