Still RX70-40 Скачать руководство пользователя страница 56

Страница: 56 / 392

Safety

Safety regulations for handling consumables

Oils

DANGER

Oils are ﬂammable!
– Follow the statutory regulations.
– Do not allow oils to come into

contact with hot engine parts.

– No smoking, ﬁres or naked ﬂames!

DANGER

Oils are toxic!
– Avoid contact and consumption.
– If vapour or fumes are inhaled,

move to fresh air immediately.

– In the event of contact with the

eyes, rinse thoroughly (for at least

10 minutes) with water and then

consult an eye specialist.

– If swallowed, do not induce

vomiting. Seek immediate medical

attention.

WARNING

Prolonged intensive contact with the

skin can result in dryness and irritate

the skin!
– Avoid contact and consumption.
– Wear protective gloves.
– After any contact, wash the skin

with soap and water, and then apply

a skin care product.

– Immediately change soaked

clothing and shoes.

WARNING

There is a risk of slipping on spilled oil, particularly

when combined with water!
– Spilt oil should be removed immediately with

oil-binding agents and disposed of according to

the regulations.

57348011850 EN - 02/2019 - 11

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды