Still RX70-40, Оригинальное руководство пользователя

Страница: 244 / 392

4
Operation
Auxiliary equipment
When the driver enters a hall for the first
time after starting work, he must be certain
that the ceiling sensor system is functioning
correctly. Despite the ceiling sensor system
being installed, the driver must also check the
speed indicator on the display-operating unit
on a regular basis to ensure that he does not
exceed the maximum speed permitted for the
environment.
• Entering a hall
The ceiling detector system automatically
detects whether the truck enters a hall. The
system then automatically slows the truck to
the maximum speed that is set for the hall.
• Leaving a hall
If the truck leaves the hall again, the ceiling
detector system enables the maximum
speed set for areas outside the hall. Due
to the range of the sensor, this may not
happen until the truck is a few metres away
from the hall exit. Before the truck is able to
accelerate to the maximum speed permitted
for outdoor areas, the speed limitation must
still be unlocked. To do this, release the
accelerator briefly and then operate the
accelerator again.
• Switching on the truck in a hall
If the truck is switched on inside a hall, the
ceiling detector system detects the hall
ceiling and reduces the driving speed to the
maximum speed that is set for halls.
Possible limitations for object recognition
• If the truck moves under larger overhead
structures outdoors, e.g. a pedestrian
bridge, the ceiling sensor system may
interpret this overhead structure to be a hall
ceiling and reduce the maximum speed.
• In rare cases, it may occur that the ceiling
sensor system does not recognize a ceiling
and does not then reduce the speed. This
can happen if the signals from the ceiling
sensor are insufficiently reflected due to the
ceiling geometry; for example, if there are
large window areas at a 45° angle.
232 57348011850 EN - 02/2019 - 11