Still RX70-40 Скачать руководство пользователя страница 227

Страница: 227 / 392

Operation

Attachments

7325_003-049

Quadruple mini-lever

– To release the clamp locking mechanism,

push the operating lever (1) forwards.

The LED for button

(2) lights up as long as

the clamp locking mechanism is released.

NOTE

The hydraulic function for opening the clamp

is available for one second after the clamp

locking mechanism is released. After one

second, the clamp locking mechanism is

automatically reactivated.

– To open the clamp, push the operating lever

(1) forwards again.

The clamp can be closed without releasing the

clamp locking mechanism.
– To close the clamp, pull the operating lever

(1) backwards.

6210_003-097

Joystick 4Plus

– To release the clamp locking mechanism,

press and hold shift key

(3) and move the

horizontal rocker button (1) to the right.

– Keep shift key

(3) pressed and move

the horizontal rocker button (1) back to the

neutral position.

The LED (2) lights up as long as the clamp

locking mechanism is released.
– To open the clamp, press and hold shift key

(3) and move the horizontal rocker button

(1) to the right.

NOTE

The hydraulic function for opening the clamp

is available for one second after the clamp

locking mechanism is released. After one

second, the clamp locking mechanism is

automatically reactivated.

The clamp can be closed without releasing the

clamp locking mechanism.
– To close the clamp, press and hold shift key

(3) and move the horizontal rocker button

(1) to the left.

57348011850 EN - 02/2019 - 11

215

Содержание RX70-40









































































































































































































































































































































































































Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды

Still RX70-40, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-40

Отзывы:

Похожие инструкции для RX70-40

Бренды по названию

Популярные бренды