Still R 07-25 Скачать руководство пользователя страница 96

Страница: 96 / 246

Operation

Battery

Secure the engine cover in the lifted position.
– To do this, release the support rod (1) from

the holder (in the engine cover).

– Latch the support rod in the safety plate (2)

such that the support rod is locked in place

and secured.

– Ensure that the engine cover is secured

against falling shut unintentionally.

Closing the engine cover

Release the engine cover.

WARNING

Risk of crushing!
When lifting and closing, limbs could become

trapped.
– Do not reach between covers and chassis.

Release the engine cover.
– To do this, unlatch the support rod (1) from

the safety plate (2) and position the support

in the holder (in the engine cover).

Close the engine cover.
– To do this, press down the engine cover

against the pressure of the gas spring and

hold the engine cover closed.

– Tighten the locking screw (1) by turning the

screw clockwise.

– Ensure that the engine cover is closed

correctly.

172780 EN - 06/2017

Содержание R 07-25























































































































































































































































Результаты поиска

Содержание R 07-25

Отзывы:

Похожие инструкции для R 07-25

Бренды по названию

Популярные бренды

Still R 07-25, Оригинальное руководство пользователя

Результаты поиска

Содержание R 07-25

Отзывы:

Похожие инструкции для R 07-25

Бренды по названию

Популярные бренды