Still R 07-25 Скачать руководство пользователя страница 183

Страница: 183 / 246

Maintenance

Providing access to maintenance points

Installing the engine cover

Lift in the engine cover.

WARNING

Risk of crushing!
When lifting and closing, limbs could become

trapped.
– Do not reach between covers and chassis.
– Only lift up and position the covers using two

people.

Lift in the engine cover.
– To do this, fold up the handles of the engine

cover.

– Lift in the battery cover with help from

another person.

Position and close the engine cover.
– To do this, align and position the engine

cover.

– Fold in the handles.
– Ensure that the engine cover is closed

correctly.

172780 EN - 06/2017

173

Содержание R 07-25























































































































































































































































Результаты поиска

Содержание R 07-25

Отзывы:

Бренды по названию

Популярные бренды

Still R 07-25, Оригинальное руководство пользователя

Результаты поиска

Содержание R 07-25

Отзывы:

Бренды по названию

Популярные бренды