Still R 07-25 Скачать руководство пользователя страница 78

Страница: 78 / 246

Operation

Commissioning

7090_342-005

Releasing the seat belt

– Push the red button (4) on the buckle (1).
– Slowly guide the belt tongue back to the

retractor by hand.

– Using increased force, pull the seat belt

around 10-15 mm out of the retractor to

disengage the blocking mechanism.

– Slowly allow the seat belt to retract again.
– Protect the seat belt from dirt (for example,

by covering it).

NOTE

Do not allow the seat belt to retract too quickly.

The automatic blocking mechanism may be

triggered if the belt tongue strikes the housing.

It will then no longer be possible to pull the seat

belt out with the usual force.

Checking the manual tow coupling

(variant)

WARNING

Risk of trapping or crushing!
– Do not reach into the open coupling.

NOTE

If the coupling is engaged and disengaged

more than 2-3 times per shift, the coupling

must be relubricated.

– Push the towing pin (2) downwards, turn the

pin by 90° and pull the pin out.

– Check towing pin for damage.
– Clean any debris from the locating hole.
– Insert towing pin, push it downwards

against the pressure of the locking spring,

rotate 90° and lock it in place.

172780 EN - 06/2017

Содержание R 07-25























































































































































































































































Результаты поиска

Содержание R 07-25

Отзывы:

Бренды по названию

Популярные бренды

Still R 07-25, Оригинальное руководство пользователя

Результаты поиска

Содержание R 07-25

Отзывы:

Бренды по названию

Популярные бренды