Still R 07-25 Скачать руководство пользователя страница 68

Страница: 68 / 246

Operation

Checks and tasks to be carried out prior to commissioning

6321_003-041

Switching the seat heater (variant) on

and off

NOTE

The seat heater only functions if the seat

contact switch is active, i.e. when the driver is

sitting on the driver's seat.

– Switch the seat heater (7) on or off using the

switch.

127-130

Top up the screen wash reservoir

CAUTION

The washer system can be damaged!
If there is no anti-freeze in the system, the washer

system can be damaged.
– Always use washer ﬂuid containing anti-freeze.

The reservoir for the front and rear screen

wash ﬂuid is location behind the seats.
– Fold the seat completely forwards.
– Open the ﬁller cap on the screen wash

reservoir.

– Top up the screen wash reservoir with

washer ﬂuid and anti-freeze according to

manufacturer speciﬁcations.

– Close the ﬁller cap on the screen wash

reservoir.

172780 EN - 06/2017

Содержание R 07-25























































































































































































































































Результаты поиска

Содержание R 07-25

Отзывы:

Бренды по названию

Популярные бренды

Still R 07-25, Оригинальное руководство пользователя

Результаты поиска

Содержание R 07-25

Отзывы:

Бренды по названию

Популярные бренды