Still R 07-25 Скачать руководство пользователя страница 239

Страница: 239 / 246

Technical data

Towed load for the front coupling (tow tractors with short and long wheelbases)

NOTE

The permissible haul per hour is the total

distance travelled, including the return journey

and any downhill gradients.

NOTE

Only braked trailers are permitted for loads ex-

ceeding 9 t and when travelling on downward

slopes.

Towed load for the front

coupling (tow tractors with

short and long wheelbases)

The tow tractor can pull the same load at the

front as at the rear.

NOTE

The towed load at the front is dependent on the

coupling height (installation height of the front

coupling). If the coupling height is lowered,

the permissible towed load at the front of the

tow tractor is also reduced; see the table.

NOTE

The towed load is dependent on the maximum

pulling force of the tow coupling (see the

identiﬁcation plate for the tow coupling). The

towed load must not exceed the permissible

pulling force of the tow coupling and the

permissible pulling force of the truck.

Towed load for the front coupling
Coupling height (mm)

Max. pulling force (N)

700

16000

800

14700

900

13300

1000

12000

172780 EN - 06/2017

229

Содержание R 07-25























































































































































































































































Результаты поиска

Содержание R 07-25

Отзывы:

Похожие инструкции для R 07-25

Бренды по названию

Популярные бренды

Still R 07-25, Оригинальное руководство пользователя

Результаты поиска

Содержание R 07-25

Отзывы:

Похожие инструкции для R 07-25

Бренды по названию

Популярные бренды