Still R 07-25 Скачать руководство пользователя страница 113

Страница: 113 / 246

Operation

Lighting

– Press the top toggle switch.
The parking light, headlights and rear lights

are switched off.

Main beam

– Press forward and engage operating lever

(3) on the left of the steering column with the

driving light switched on.

The blue main beam indicator light illuminates

on the display unit - the main beam is switched

on.
– Pull operating lever back.
Main beam is switched off.

NOTE

To operate the headlight ﬂasher, brieﬂy pull

the operating lever back.

NOTE

As an option, the operating lever can be

located on the right-hand side.

Switching the direction indicators on

and off

– Pull the operating lever (3) on the left of the

steering column upwards.

The right-hand direction indicator is switched

on and the right-hand direction indicator light

(4) in the display unit is ﬂashing.

– Push the operating lever downwards.
The left-hand direction indicator is switched

on and the left-hand direction indicator light (4)

in the display of the display unit is ﬂashing.

172780 EN - 06/2017

103

Содержание R 07-25























































































































































































































































Результаты поиска

Содержание R 07-25

Отзывы:

Похожие инструкции для R 07-25

Бренды по названию

Популярные бренды

Still R 07-25, Оригинальное руководство пользователя

Результаты поиска

Содержание R 07-25

Отзывы:

Похожие инструкции для R 07-25

Бренды по названию

Популярные бренды