7 Operating states
ASTOPAD
®
Instructions for Use
29
7.4 Increasing/decreasing the set temperature
Control panel
Action
1.
Press the Plus (3) / Minus (4) buttons to raise or lower the
selected set temperature in 0.5°C increments.
2.
Confirm the new set temperature by pressing
the Start button (6).
Device
response
The Start LED (6) flashes green until confirmation by press-
ing the Start button (6).
The selected set temperature (2) is saved.
When the applied part is started, the display (5) shows the
symbol or , until the difference with regard to the set
temperature (2) is less than 1°C.
LED Start (6) lights up green.
Temperature control is active.
If no applied part is connected to an output (A or B) or the
heating process does not start, the display (1) and (2) go
off.
The set temperature can be set independently for each out-
put A and B in the range from 32.0°C to 39.0°C.
