7 Operating states
ASTOPAD
®
Instructions for Use
27
7.2.2 On mode
(an applied part connected)
Control panel
Action
Press the Standby button (9) to switch the control unit from
Standby mode
to
On mode
.
Device re-
sponse
The Standby LED (9) goes out.
The Start screen (12) is displayed for 1 second.
The equipment performs a self-test. The LEDs (6), (10)
flash and the acoustic alarm signal sounds, to confirm that
the control unit is working properly.
The display shows the current actual temperature (1) and
the stored set temperature (2).
The current software version is displayed in the bottom right
corner of the Start screen.
The self-test remains active until the heating process is
started.
By pressing the Standby button and simultaneously holding
the Stop output B button, the Start screen is displayed for
as long as the Stop button is pressed.
