STIEBEL ELTRON SOM 9s Скачать руководство пользователя страница 4

Страница: 4 / 104

us.ind

| 4

SOM 9s

The unit must only be located in dry interior rooms.
The controller must additionally be supplied from a double
pole switch with contact gap of at least 3 mm.
Please pay attention to separate routing of sensor cables
and power supply cables.

In order to mount the device to the wall, carry out the
following steps:

Unscrew the cross-head screw from the cover and re-
move it along with the cover from the housing

Mark the upper fastening point on the wall. Drill and
fasten the enclosed wall plug and screw leaving the head
protruding

Hang the housing from the upper fastening point and
mark the lower fastening points (centres 150 mm)

Insert lower wall plugs

Fasten the housing to the wall with the lower fastening
screws and tighten

Carry out the electrical wiring in accordance with the
terminal allocation, see chap. 2.2

Put the cover on the housing

Attach with the fastening screw

Installation

2.1 Mounting

2.2

electrical connection

note:
The pump speed must be set to 100 % when
auxiliary relays or valves are connected.

WARnIng!

electric shock!
Upon opening the housing, live parts
are exposed.

Always disconnect the control-
ler from power supply before
opening the housing!

ATTenTIOn! eSD damage!

Electrostatic discharge can lead to da-
mage to electronic components!

Take care to discharge proper-
ly before touching the inside
of the device! To do so, touch
a grounded surface such as a
radiator or tap!

upper fastening

point

lower fastening point

cover

screw

Note
Strong electromagnetic fields can impair the
function of the controller.

Make sure the controller as well as the

system are not exposed to strong electro-
magnetic fields.

Содержание SOM 9s









































































































Результаты поиска

Содержание SOM 9s

Отзывы:

Похожие инструкции для SOM 9s

Бренды по названию

Популярные бренды

STIEBEL ELTRON SOM 9s, Установка, Эксплуатация, Функции и Настройки, Устранение Неисправностей

Результаты поиска

Содержание SOM 9s

Отзывы:

Похожие инструкции для SOM 9s

Бренды по названию

Популярные бренды