STIEBEL ELTRON SOM 9s, Установка, Эксплуатация, Функции и Настройки, Устранение Неисправностей

Страница: 20 / 104

© Stiebel 11091_SOM_9s.mon
us.ind
d
| 20
SOM 9s
Adjustment channels
Channel Sub channel 1 Sub channel 2 Factory
setting
Change to Description Page
S2MAX 140 °F Tank maximum limitation 2 78
SMXS2 4 Sensor tank max 2 79
LST2 ON Loading tank 2 79
COL > Collector
CEM 270 °F Collector emergency temperature 80
OCCO** OFF Option collector cooling 80
CMAX 230 °F Maximum collector temperature 80
OCMI OFF Option collector minimum limitation 80
CMIN 50 °F Minimum collector temperature 80
OTCO OFF Option evacuated tube collector function 81
TCST 07:00 Evacuated tube collector starting time 81
TCEN 19:00 Evacuated tube collector ending time 81
TCRU 30 s Evacuated tube collector runtime 81
TCIN 30 min Evacuated tube collector standstill interval 81
OCFR OFF Option collector frost protection 82
CFR O 40 °F Antifreeze temperature collector on 82
CFR F 42 °F Antifreeze temperature collector off 82
FRPST 1 Antifreeze tank selection 82
LLOGI > Loading logic
PRIO Priority logic 82
PRIO 1 Priority logic 82
OSTS OFF Tank set option 83
TST1 120 °F Set tank temperature tank 1 83
TST2 120 °F Set tank temperature tank 2 83
OSE OFF Spread function option 83
DTSE 40 Spread difference 83
tLB 2 min Loading break time 82
tRUN 15 min Circulation runtime 82
PSPEE OFF Pause speed option 83
PDELA OFF Pump delay option 83
OOVRU* OFF Overrun option 84
COOL > Cooling functions
OSYC** OFF System cooling 85
OSTC OFF Tank cooling 85
OHDP** OFF Heat dump 85
PUMP > Pump speed
PUMP1 OnOF Speed variant pump 1 79
PUMP2 OnOF Speed variant pump 2 79
PUMP3 OnOF Speed variant pump 3 79
MAN > Manual mode
MAN1 Auto Manual mode 1 88
MAN2 Auto Manual mode 2 88
MAN3 Auto Manual mode 3 88
MAN4 Auto Manual mode 4 88
BLPR
>
OFF Blocking protection 88
OTDIS > OFF Thermal disinfection option 89
OPARR > OFF Parallel relay option 90
OHQM > OFF Energy metering option 90
GFDS > OFF Registration Grundfos sensors 90
PRS* > OFF Pressure monitoring option 92
DATE> Enter date 92
LANG > En Language 93
UNIT > °F Unit 92
OSDC > SD card option 93
CODE 0000 User code 96
RESET OFF Factory setting
* This channel is only available if the Grundfos sensors have been registered in the gFDS channel.
** are blocked against each other