stertil-KONI Freedomlift SK 2055 Скачать руководство пользователя страница 16

Страница: 16 / 118

Installation and Service Manual

SK 2055 / 2070 / 2090

• Ensure that operators are qualified and that they are trained in the safe

use and operation of the Freedomlift using the manufacturers operating

instructions.

• Establish procedures to periodically inspect the Freedomlift in accordance

with the manufacturer's instructions.

• Ensure that Freedomlift inspectors are qualified and that they are adequately

trained in the inspection of the Freedomlift.

• Display the manufacturers operating instructions in a conspicuous location in

the machine area convenient to the operators.

• Do not modify the Freedomlift in any manner without the prior written consent

of the manufacturer.

2.10 Personal protection equipment

The following personal protection equipment is recommended for service

engineers:
• Protective clothing

• Gloves

• Ear protection

• Safety shoes

2.11 Environmental aspects

The owner and/or user of the Freedomlift SK 2055 / 2070 / 2090 is responsible

for the disposal of waste materials (oil etc.) in accordance with the applicable

local laws or regulations. When the machine has reached the end of its useful

life, the owner and/or user is responsible for the safe disassembly of the

machine and for the disposal of the components, in accordance with the local

laws or regulations.

2.11.1 Disposal

The owner and/or user of the Freedomlift is responsible for the disposal

of waste materials (oil etc.) in accordance with the applicable local laws or

regulations. When the machine has reached the end of its useful life, the owner

and/or user is responsible for the safe disassembly of the machine and for the

disposal of the components, in accordance with the local laws or regulations.

Содержание Freedomlift SK 2055























































































































Результаты поиска

Содержание Freedomlift SK 2055

Отзывы:

Похожие инструкции для Freedomlift SK 2055

Бренды по названию

Популярные бренды

stertil-KONI Freedomlift SK 2055, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Freedomlift SK 2055

Отзывы:

Похожие инструкции для Freedomlift SK 2055

Бренды по названию

Популярные бренды