S Series FW 3.02.02
www.stenner.com
66
OPERATING DISPLAY
continued
Hold for
2 seconds
ENTER PASSWORD
Enter Password
0-9, A-Z
set
From any operating display
INCORRECT
PASSWORD
If password
is correct
If password
is incorrect
Go to
Main Menu
or
to
Alarm Reset
if
in alarm condition.
Displays for 3 seconds and then returns
to previous operating display
Manual
50
%
This example shows the
MANUAL
operating display. The password steps are the same from any operating display.
NAVIGATION IN OPERATING MODE
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
ENTER
Press and hold for 2 seconds
to go to the Main Menu
BACK
Cycles the display through
the units of output
PRIME
Runs pump at 100% speed
while button is pressed
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
