S Series FW 3.02.02
www.stenner.com
62
Timer
100
%
OPERATING DISPLAY
continued
Run Pump?
Yes
yes/no
select
Timer
Timer 01 ON
50.0%
Prime
Timer
Timer 01
Next Event
Timer
22
RPM
Hold for 2 seconds
Timer
OFF
Next
To Password Entry Display if display is
locked. To
Main Menu
if unlocked.
If unlocked or password not set.
Metric is displayed if
selected in
Configuration
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
Timer
0.83
GPH
Timer
1.77
oz/min
Timer
20.0
GPD
Monday 01:15:00
Returns to previous display after
ten seconds with no button push
10 seconds
7 DAY TIMER
NAVIGATION IN 7 DAY TIMER MODE
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
ENTER
Press and hold for 2 seconds
to go to the Main Menu
BACK
Cycles the display through
the units of output
PRIME
Runs pump at 100% speed
while button is pressed
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
NOTE: Displayed outputs are approximate and may be rounded off. For some units of measure, flows close to zero may
display zero.
