46
RoomWizard
| SYSTEM MANAGER MANUAL
47
LOTUS DOMINO |
RoomWizard
8
In the “Server Access” field, enter the Base URL for the server.
If the synchronization software was installed in the root Domino
6.x data directory, use http://dnsservername.mycompany.com/
rwconnector_3.8.7.nsf/connector?openagent.
If the synchronization software was placed in a subdirectory
named RoomWizard, use http://dnsservername.mycompany.com/
RoomWizard/rwconnector_3.8.7.nsf/connector?openagent.
NOTE
You may also use the IP address of the server in place of the FQDN.
9
Enter the “Username” and “Password” for access to the server
pages, if necessary.
10
Set the “Poll Interval.” (The default value of 60 seconds is
recommended.)
11
Select “No” for “RoomWizard will get the time from the server” as this
functionality is not yet supported.
4
Go to the “Room” tab and enter the room name and site name in the
“Room Name” field. This entry must exactly match the name in the
Resource Reservation database, e.g. Executive Briefing Room/New
York. This room and site name will appear on the RoomWizard touch
screen.
5
Select “Save on THIS Wizard.”
6
Go to the Device > Synchronization tab.
7
Under “Configure Synchronization for RoomWizard usage,” select
“Use external source.”
