79
11
Legal Guarantee
In accordance with German statutory regulations, there is a 2-year legal guarantee on this product for the
customer.
The seller will remove all manufacturing and material faults that occur in the product during the legal
guarantee period and affect the correct functioning of the product. Natural wear and tear does not constitute
a malfunction. Legal guarantee does not apply if the fault can be attributed to third parties, unprofessional
installation or commissioning, incorrect or negligent handling, improper transport, excessive loading, use of
improper equipment, faulty construction work, unsuitable construction location or improper operation or use.
Legal guarantee claims shall only be accepted if notification of the fault is provided immediately after it is
discovered. Legal guarantee claims are to be directed to the seller.
The seller must be informed before legal guarantee claims are processed. For processing a legal
guarantee claim an exact fault description and the invoice / delivery note must be provided.
The seller can choose to fulfil the legal guarantee either by repair or replacement. If the product can neither be
repaired nor replaced, or if this does not occur within a suitable period in spite of the specification of an
extension period in writing by the customer, the reduction in value caused by the fault shall be replaced, or, if
this is not sufficient taking the interests of the end customer into consideration, the contract is cancelled.
Any further claims against the seller based on this legal guarantee obligation, in particular claims for damages
due to lost profit, loss-of-use or indirect damages are excluded, unless liability is obligatory by German law.
Standard Factory Settings
In the submenu Settings -> Service -> Extras -> factory settings the system regulator can be reset to
the factory presettings. This means that the individual settings of parameter values and function
settings are deleted from the system regulator’s memory and the standard factory settings will then
apply again.
No parameter values or function settings usually have to be made again after a power outage because
these values are saved in the regulator’s EEProm. After a longer power outage it may, under certain
circumstances, be necessary to set the time and date again. If this is the case the reset time and the
date are displayed by the regulator automatically after the power cut.
When the system regulator is delivered the following parameter values and setting functions are
preset. Any changes to the parameter values or the functions should be entered in the following table
so that the error can be localized and rectified as soon as possible in the event of the regulator
breaking down or an inadvertent erroneous setting. For repairs we also ask you to prepare a hydraulic
layout diagram of your system and to hand this over to the dealer or manufacturer along with the filled-
in table of setting values.
