Steca StecaGrid 10 000+ 3ph, Инструкция по установке и эксплуатации

Страница: 29 / 47

9.2 General operating functions
• Hidden content is shown using the

and

buttons.
• Repeated button presses: If

need to be pressed repeatedly, you can alternatively hold these
buttons pressed for a long time. The rate of repetition increases the longer the button is held.
• Pressing any button switches on the backlight of the display if this has previously automatically
switched off.
9.3 Main operating functions
The figures in this section show examples.
Status display
1. Press
ESC
for 1 second to call up the status display as
required (fig. left).
2. Press  to display a different status value.
Menu navigation
1. Press
ESC
for 1 second to call up the status display as
required.
2. Press
SET
. The main menu is displayed with the top
item selected.
3. Press  to select a menu entry.
4. Press
SET
to call up the submenu (fig. left).
5. Repeat steps 3 and 4 for further submenus as required.
Event messages
See Section 11 on p. 73 onwards.
Displaying yields numerically (list) and graphically (chart)
√ The status display is shown.
1. Press
SET
. The main menu is displayed with
Yield
selected.
2. Press
SET
. The list with yield time periods is shown.
3. Press

to select a yield time period.
4. Press
SET
. The individual yields for the yield time period
are shown in a list (fig. upper left).
5. Press  to select an individual yield value.
6. Press
SET
. The selected individual yields are shown in a
chart (fig. lower left).
7. Press  to page through the charts.
8. Press SET to return to the list.
68
744.378 | 12.13
EN