Steca StecaGrid 10 000+ 3ph, Инструкция по установке и эксплуатации

Страница: 10 / 47

7.3.2 Information
The information shown on the display is described below using illustrative examples.
Status display
The status display shows measurements as listed below:
3 4
22
7 5 6
1

Measurement name

Measurement with units

Date

Symbol non-confirmed status messages ; more information
on this is provided in Section 11, p. 73.

Animated Connect symbol with 2-digit inverter address;
indicates data traffic on the RS485 bus.

Symbol for Derating

Time
_
The following applies to the status display:
• The measurements shown in the status display are de-
fined under
Settings
/
Measurements
. Some measure-
ments are always displayed (default setting).
• Current values are not displayed at night (solar irradiation
too low; example in fig left).
• The
CO
2
savings
shown in the status display are calcu-
lated using the savings factor 508 g/kWh .
Menu
2
1

Designation of the main/submenu

Menu entries
Numeric yield (day, month, year)
Daily, monthly and annual yields can be displayed numerically in a List .
2
1

Yield period (day/month/year)

Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
Day yield: last 31 days
1)
Monthly yield: last 12 months
1)
Annual yield: last 30 years
1)
1)
A yield value of
0
is shown when the inverter was not yet
installed at this time.
Numeric yield (total yield)
The total yield is displayed in its own window.
3
22
1

Yield period for Total yield (all yields since initial commis-
sioning)

Starting point of recording

Total yield with units
49
744.378 | 12.13
EN