7.3.3
Control elements
The control elements shown on the display, which are used for performing settings in the inverter,
are described below using illustrative examples.
Selection list with check boxes
3
22
22
1
22
Designation of the selection list
Check boxes with names:
–
Check boxes allow multiple selection
–
The currently selected check box is highlighted in black
–
Preset check boxes have no frame and are always
switched on (cannot be changed).
Scroll bar
Selection list with radio buttons
3
22
22
22
1
Designation of the selection list
Radio buttons with names:
–
Radio buttons are exclusive-OR (only one radio button
can be switched on)
–
The currently selected radio button is highlighted in
black
Scroll bar
Dialogs
3
22
1
Dialog heading
A question presented to the user
Response possibilities:
Back
(cancel): Press
ESC
Confirm
(answer the question with
Yes
): press and hold
SET
for 1 second
Numerical settings
22
1
22
22
Designation of the numerical setting
Value to be set; the selected value to be set is highlighted
in black.
When performing numerical settings of remuneration and
dates, the following applies:
Remuneration
• Possible currencies: £ (Pound), € (Euro), kr (Krone),
none
.
•
The maximum value that can be set for remuneration is
limited for technical reasons. The remuneration must be
set using different units as required. Example: Dollars
instead of Cents (set a currency of
none
).
Date
When setting the month/year, a check is performed to ensure
that the selected day is valid. If not, then the day is automati-
cally corrected.
Example: 31.02.2011 is corrected to 28.02.2011.
51
744.378 | 12.13
EN
Содержание StecaGrid 10 000+ 3ph
